Elevate Juniper Skills: Ace the Top best JN0-663 Exam for Advanced Networking!

8 mn read

Elevate Your Juniper Skills Conquer the JN0-663 Exam for Advanced Networking!


Perhaps this is your first step toward JN0-663 Exam accreditation, or you are returning for another round. We hope you find this test challenging, educating, and preparing you to pass the JN0-663 exam. If this is your initial study guide, take time to unwind. This might be the first step toward a new, higher-paying job and an incredible JN0-663 Exam career. If you’ve been around the area a few times, take a moment to help fresher techies by answering specific JN0-663 Exam questions. After all, it is our wonderful community that illuminates the content and contributes to the creation of something truly remarkable.

If you are afraid of your Juniper JN0-663 exam (Service Provider Routing and Switching Professional ) and are not prepared, there is no need to worry. Get the most recent Juniper JN0-663 exam braindumps with 100% accurate answers. This website is considered one of the greatest for saving money by providing 90 days of free updates after purchasing the Juniper JN0-663 exam dumps training exam.

Continue exploring and reading to learn how to prepare for the Juniper JN0-663 exam in 2024.

What is the Juniper JN0-663 Exam?

The Juniper JN0-663 exam, more commonly called the Service Provider Routing & Switching, Professional (JNCIP-SP) test, is a pro-level certification exam offered by the Juniper Networks Certification Programs (JNCP). The JN0-663 exam assesses your advanced grasp of service provider routing and switching technologies, ability to deploy and troubleshoot Junos-based equipment in service provider circumstances, and understanding of the platform architecture and capabilities.

The JN0-663 exam covers several subjects, including routing protocols like OSPF and BGP, MPLS including virtual private networks (VPNs), Quality of Service (QoS), and network safety. Candidates will also be assessed on their troubleshooting and diagnostic skills in a service provider network.

Candidates may prepare for the JN0-663 exam by taking the Juniper Networks Service Provider Routing & Switching, Professional (JNCIP-SP) curriculum, which fully covers the test subjects. This JN0-663 Exam course is intended for network professionals with a solid grasp of routing and switching fundamentals and prior experience dealing with Juniper Networks equipment.

Passing the JN0-663 Exam will demonstrate candidates’ proficiency in provider routing and switching and their ability to apply their acquaintance and skills in real-world circumstances.

The JN0-663 Exam referred to as the Service Provider Routing and Switching, Professional (JNCIP-SP), allows Juniper to examine various topics, as do all exams.

Understanding the bulk of JN0-663 Exam content is needed because they randomly examine the subjects offered. Be aware. However, that experience requirements frequently exist because they have observed the ordinary individual and what is necessary. You may continue to work past it for success with the JN0-663 Exam, but it will require more effort.

Juniper JN0-663 Exam Details

Here are the exam details for the Jn0-663 exam you must know in 2024:

  • Exam Name: The Juniper Service Provider Routing and Switching
  • Exam Code: JN0-663
  • Number of Questions: 65
  • Passing Score: Variable
  • Exam Duration: 120 minutes

Why Choose Us?

CertMagic’s customizable practice examinations (desktop and web-based) assist students in identifying and correcting their faults. The customized Juniper JN0-663 exam practice test allows users to tailor the Juniper Network Service Provider Routing & Switching Accreditation Questions and time to their needs, allowing them to simulate a real-world exam setting and learn how to handle pressure. The Juniper JN0-663 exam certification sample test’s current structure assures that clients have no problems when studying for the examination. Students have unlimited time to track their performance on previous assessments to identify and avoid mistakes while administering the final JN0-663 exam.

Buyers of CertMagic will receive updates for 90 days after their Jn0-663 exam purchase. Before purchasing the Service Provider Routing and Switching, Pro JN0-663 Exam preparation material, everybody is welcome to test a free demo. A support system is accessible 24 hours daily, seven days weekly, to help consumers experiencing difficulties. This software is a complete solution and a blessing for people who want to succeed on their first try at the Juniper JN0-663 exam. Buy It Today and Start Preparing for the Service Provider Routing & Switching, Professional  JN0-663 Exam!

Studying for weeks and then coming into class uninformed would be terrible because your resources are inadequate. CertMagic despises the concept that such a thing might happen, yet it does, as we have shown. So, we have a confidence pledge: if you use our materials and cannot obtain certification, please contact our professional customer care, and we will assist you in resolving the situation. We provide free premium access to a fresh exam if our JN0-663 study guides fail you. So, regarding the Service Provider Routing & Switching Professional (JNCIP-SP), be confident because we have your back.

Elevate Your Juniper Skills Conquer the JN0-663 Exam for Advanced Networking!

  • Amazing Pass Rate

We’re delighted to have helped folks clear the path and pass the Juniper JN0-663 Exam the first time. Our success record over the last five years seems to be quite impressive. CertMagic is the top choice for all IT professionals studying for the test.

  • Current And Correct Test Questions.

CertMagic supplies you with the most up-to-date and effective Juniper JN0-663 Exam inquiries, and we will regularly update our JN0-663 Exam question bank to reflect the current tests. CertMagic’s seasoned and highly qualified specialists have audited our content, ensuring it is correct and current.

  • Online Examination Simulation

You can learn the JN0-663 Exam setting, methodology, and question kinds beforehand. This will allow you to pass the JN0-663 Exam with greater confidence.

  • The Expert Tutor Will Respond To You Between 7 * 24 Hours.

We have a variety of professionals available to answer the JN0-663 Exam or any other exam questions you may have, regardless of the time of day.

Juniper JN0-663 Exam Sample Questions

Here are the sample questions for the JN0-663 exam, which you must know before attempting the actual exam:

Question 1:

You administer an MX Series device with the exhibit’s configuration. Transmission with DSCP 000011 enters the ge-1/0/4 connection at 102 Mbps. The traffic departs the device via the ge-1/0/5 interface. No additional traffic is passing through the router.

In this case, what happens to traffic that exceeds 100 Mbps?

  1. Traffic that exceeds 100 Mbps is sent to a rate limiter.
  2. Traffic that exceeds 100 Mbps is buffered.
  3. Traffic that exceeds 100 Mbps is dropped.
  4. Traffic that exceeds 100 Mbps is transmitted.

Question 2:

According to the illustration, which OSPFv3 configuration is used on router R1?

  1. Set protocol ospf3 area interface ge-0/0/0.0. interface ge-0/0/1.0 set protocols in the OSPF3 area interface: ge-0/0/0.0
  2. Set protocols in the OSPF3 area interface ge-0/0/0.0 set protocols in the OSPF3 area interface ge-0/0/1.0 set protocols in the OSPF3 area virtual-link neighbor-id:
  3. Set protocols in the OSPF3 area interface ge-0/0/0.0 set protocols in the OSPF3 area interface ge-0/0/1.0 set protocols in the OSPF3 area Interface ge-0/0/0.0 Secondary
  4. Set protocols ospf3 area link ge-0/0/0.0 interface ge-0/0/1.0 set protocols in the OSPF3 area interface ge-0/0/0.0 interface type: p2p

Question 3:

On the same device, you are requested to set a series of interface policers and firewall filters that incorporate policers. It would be best to guarantee that the two configuration techniques are not in conflict.

What are the two factors to consider when doing this task? (Choose two.

  1. Firewall filters are applied to inbound traffic before interface policers are implemented.
  2. Outbound traffic is routed through interface policers before firewall filters.
  3. Firewall filters are applied to outgoing traffic before interface policers are implemented.
  4. Inbound traffic uses interface policers before firewall filters.

Question 4:

Your network links two portions of your customer’s network, as seen in the exhibit. They need to switch routes between Segments 1 and 2. However, both segments have the same AS number.

Which two steps will complete this task? (Choose two)

  1. Set the routing-options autonomous-system looping 1 parameter for routers R1 and R4.
  2. On routers R2 and R3, configure the BGP group to use the advertise-peer-as option.
  3. Set the routing-options autonomous-system looping one parameter for routers R2 and R3.
  4. Set the as-override parameter for the BGP group on routers R1 and R4.

Question 5:

You have built a Layer 3 VPN between PE-1 and PE-2 to enable interaction between CE-1 and CE-2.

Which assertion about the exhibit is correct?

  1. You will require an OSPF import policy on PE-1 to accept the BGP routes learned from PE-2 via the Layer 3 VPN.
  2. You will require a BGP export policy on PE-1 to disseminate the routes learned from CE-1 over the Layer 3 VPN.
  3. You will require a VRF import policy on PE-1 to advertise the BGP routes learned from CE-1 via the Layer 3 VPN.
  4. You will require an OSPF export policy on PE-2 to disseminate the BGP routes learned from PE-1 over the Layer 3 VPN.

Question 6:

You’ve set up a Layer 3 VPN for two PE devices. You are instructed to send specific routes from PE-1 via the VPN to the remote site while keeping all routes on the PE-1 device. You built a policy that fits the specified routes and then tagged them with the relevant target community values.

In this instance, what configuration modifications must be performed to meet the requirement?

  1. Set the export parameter, then apply the policy to the my-ext-group BGP subgroup configuration.
  2. Set the vrf-export option and apply the policy in the modified routing-instances vpn-a hierarchy.
  3. Set up an RIB group or implement the policy as an import directive to routes in the bgp.13vpn.0 routing table.
  4. Set up the import option and apply the rules to the my-ext-group BGP network configuration.

Question 7:

R1 routes incoming voice traffic to the particular ef forwarding class. All other traffic is sent to the best-effort forwarded class. You have set up a CoS rewrite rule on R1 to incorporate the correct CoS bit values in packets delivered to R2. You want R2 to categorize traffic based on the CoS marks generated by R1.

What two setup steps are required to complete this task? (Choose two.

  1. Connect the behavior aggregate classifiers to the ge-0/0/1.0 interface on R2.
  2. Apply the CoS rewriting rule to the ge-0/0/1.0 interface on R2.
  3. Set up a CoS rewriting rule on R2 and assign matching CoS values.
  4. Set up a behavior aggregation classifier on R2.

Question 8:

You have a Layer 3 VPN set up between PE-1 and PE-2, as well as between PE-1 and PE3. You use a route reflector (RR-1) to give away VPN paths to your IBGP peers. Verifying that only relevant routes are delivered from RR-1 to each PE router would be best.

Which assertion about the exhibit is correct?

  1. Use VRF export rules on RR-1 to regulate which routes are delivered to each PE router.
  2. Only route target filtering on RR-1 controls which routes are routed to each PE router.
  3. Use firewall filtration on RR-1 and all PE devices to regulate the routes sent to every PE router.
  4. Route target filtration on RR-1 and all PE devices should be used to regulate which routes are transmitted to each PE router.

Question 9:

You are setting up a Layer 3 VPN between two PE machines. You currently have a single local IPv4 BGP peering between the PE devices. You must verify that CE devices’ IPv4 and IPv6 routes are transferred between these locations.

Which two statements make sense in this situation? (Choose two.

  1. You must activate IPv6 tunneling on the LSPs that connect the PE devices.
  2. You must set up IPv6 BGP peering between the two PEs.
  3. Activate the inet6-vpn NLRI on both PE machines.
  4. Activate the inet-vpn NLRI on both PE routers.

Question 10:

Every network illustrated in the exhibit has more than one BGP speaker. You run ISP A and have to guarantee that Customer Y transmits traffic to you over the directly linked link. Customer Y should not be utilized to connect to your network.

What will you do to complete this task?

  1. Promote routes to Customer X using the custom-defined 0:0 community.
  2. Post routes to Customer X in the well-known no-advertise neighborhood.
  3. Use the custom 65535:65535 community to advertise routes to Customer Y.
  4. Promote routes to Customer Y within the well-known no-export community.


Some are becoming certified for the first time, while others are earning their tenth or eleventh qualification. For those who strive for perfection, the process never truly ends. If you pass the JN0-663 exam, it won’t be shortly after you have to study for another exam! We have thousands of test preparation solutions, including the complete spectrum of Juniper certifications; check them on our exam list. We can assist you with the following stages if we previously worked on the JN0-663 exam.

It might be challenging to stay focused on your JN0-663 exam studies, but realize that the top careers in the world are just a few examinations away. Whether you work in security or entry-level technology, certification offers a clear, accessible, and gratifying road to high-paying professions. They provide a better work-life balance and allow you to network with some of the world’s most influential business executives. So please don’t give up; it’s worth it, and all your hard work will pay off!

Customers using Windows laptops or desktops can take and prep for the practice exam effectively. Many candidates are presently using these JN0-663 exam formats and working hard every day to prepare for their bright future.

Even consumers who have previously used it to prepare for the Juniper, the service provider Routing & Switching JN0-663 exam certification test, have ranked it among the best. Comment below your queries about the JN0-663 exam and get the best answer from our professional team accordingly!

Leave a Reply

Your email address will not be published. Required fields are marked *

Certmagic.com is Providing IT Certification Exams for over 500+ Exams.
We offer Quality Products in PDF & Test Engine format which helps our Clients pass the Exams using our Products.

© Copyright 2022 Certmagic, Inc All rights reserved.

Our Newsletter

Subscribe to our newsletter to get our news & deals delivered to you.

Get in Touch